Get Rid of the Rust!

Stop rust in its tracks with Eastwood's Rust Encapsulator. Rust Encapsulator chemically reacts with rust to form a hard, durable coating - halting the further spread of rust! Follow these simple steps to halt further corrosion and spread of rust with Rust Encapsulator:

1. Remove any loose rust with a wire brush.
2. Be sure your surface is grease and oil free (Eastwood's PRE Painting Prep works great!)
3. Paint or spray Rust Encapsulator to the prepped area. Rust Encapsulator can be thinned 20% with laquer thinner to spray, and also comes in convenient aerosol cans.
4. Allow to dry for 6-8 hours. (You can apply 2 coats - wait 2-3 hours between coats.)
5. Topcoat is not required, but can be applied after 6-8 hours, if desired.

Paint-on Rust Encapsulator comes in pint, quart, and gallon sizes. One quart will double-coat up to 50 feet, while the gallon covers a whopping 200 feet with a double-coat. Aerosol cans are also available for hard-to-reach areas. Available in red, black, and silver, Rust Encapsulator looks great even without a topcoat. Eastwood's Rust Encapsulator is the best on the market - proven to be superior in sunlight resistance, preventing rust creep, and overall durability.

Get Eastwood's Rust Encapsulator and get rid of the rust!